Pero cleaning plant KDA – 1452

KDA50WSSNT – electrically heated, completely encased

Good, the system was used as a demonstration system

• Washing of individual parts, bulk material and set goods
• Cleaning of e.g. cooling lubricants, oils, greases, dust, chips, abrasion
• Achieving the defined technical cleanliness
• Intermediate and final cleaning
• High throughput

Water-based media

• 2-bath-machine (1. bath = washing, 2. bath = first rinsing, 3. bath = second rinsing)
• 3x blower for blowing off of parts from above
• 1x blower for blowing off of parts from bottom
• Halar coating for fan above/bottom, price for four pieces
• Halar coating for two suction fan
• 2 x fresh water supply made of stainless steel for demineralized water
• cascade connection between washing bath and rinsing bath shut-off feature with pneum. cock valve
• Oil separator UNI (100 liter) for separating or flooding oil and grease
• Pero Filter DF025 with changeable filter insert 5 µm – 200 µm per filter, in washing bath, rinsing bath 1 and rinsing bath 2
• Magnetic candle insert for filter DF025 incl. 2 high power magnets per filter, in washing bath, rinsing bath 1 and rinsing bath 2
• Air heater 15kW incl. blower nozzles top/bottom (standard)
• 3x Lateral canal compressor incl. nozzle (on top, on bottom and side)
• Compressed air blower with photo sensor with ma. 6 nozzles.
• Surcharge for suction with water cooled vapour condenser
• Base tray made of stainless steel, uncoated without leakage sensor
• 2x Extension for inlet with 400 mm incl. conveyor belt and base tray
• Parts transfer, slide sheets, roller operation
• Pump out unit for bath incl. all tanks
• Automatic lubrication of conveyor belt bearing
• Note: Plant picture is an example picture. Pictures on demand

Documents: